Polishing timber floors is a specialist's job. There is no doubt about that. However, before professionals offering timber floor polishing services in Melbourne arrive, you have our task cut out. You need to take certain preparatory steps. On this page, we discuss the steps you need to take, to prepare the floor for polishing.
Removal of All the Furniture
There is no prize in guessing this first step. Every furniture - small and big - has to be removed from the floor areas to be polished. It will help the floor sanders and the polishers finish the job on time. At first, all the furniture including the tables, the ottomans, the chairs, carpers have to be removed. While on one hand it will protect them from the dust generated during the sanding that precedes polishing. And secondly and most importantly, it allows the polishers to comprehensively sand, prepare and then polish the floor.
Removals of Curtains and Wall Decors
Once everything has been removed from the floor, the wall hangings and curtains are to be removed to protect them from the dust and from falling down by the vibration generated by the sanding.
Tapping off the Door & AC vents
Though the sanding conducted by the best timber floor polishing services in Melbourne does not generate too much dust and dirt, yet to be on safer side, it is better to tap off the door and the AC vents.
Hammering Down the Loose Nails or Replacing Them
Then it is time to hammer down the loose nails or replacing them with new ones so that they pose no hindrances during the sanding and polishing.
Cleaning the Floor
Now the floor needs to be cleaned one final time before sanding and polishing. Clean floors help in seamless sanding and speeds up the polishing job.
Checking out the Power
This is the last preparatory step before sanding and polishing the timber floor.
Professional floor sanding and polishing service providers require adequate lighting as well as power for perfection and to run their machines. So check out the power points and the power at your home.
These are hence the steps you need to take to prepare the timber floor before sanding and polishing.